The working principle of the Manual pipeline strainer
2026-05-30Traffic:
The working principle of the Manual pipeline strainer is as follows:
1. Filtration process: When the liquid enters the filter basket through the cylinder, the solid impurity particles are blocked in the filter basket, and the clean fluid is discharged through the filter basket and from the filter outlet. The working principle of the Manual pipeline strainer mainly depends on the internal filter to block the impurity particles in the fluid, so as to achieve solid-liquid separation or purification. The purpose of fluid. Specifically, when the fluid passes through the basket filter, the larger solid particles, impurities, etc. in the fluid will be intercepted on the inner surface of the filter to form a filter cake. The clean fluid enters the outflow end of the filter through the gap of the filter and is finally discharged.
The Manual pipeline strainer is equipped with fine filters or filter layers, and the size of these meshes is designed to be smaller than the size of the impurity particles that need to be intercepted.
The filter of the Manual pipeline strainer is usually made of porous material, which has good breath ability and filtration effect. According to the filter requirements and occasions of use, you can choose filters of different specifications and materials. In addition, the Manual pipeline strainer can also be cleaned or replaced as needed to ensure its filtration effect and service life.
2. Maintenance and cleaning: As the filtration operation is carried out, more and more impurities accumulate on the filter basket will increase the resistance of the fluid through the filter basket, which may cause an increase in pressure drop.
When the pressure drop reaches a certain level, it means that the filter basket needs to be cleaned or replaced.
When cleaning, you can release the internal pressure by closing the valves at the front and rear ends of the filter, then open the flange cover of the filter and take out the filter basket for cleaning.
After cleaning, reload the filter basket into the filter, restore the connection and seal, and continue to put it into use.
Therefore, the Manual pipeline strainer is a kind of maintainable and easy-to-clean filtration device. It is suitable for pipeline systems that need to regularly remove a large number of solid impurities, especially for those with large impurities and high requirements for filtration efficiency.
Applications that hope to reduce maintenance costs.
1. Filtration process: When the liquid enters the filter basket through the cylinder, the solid impurity particles are blocked in the filter basket, and the clean fluid is discharged through the filter basket and from the filter outlet. The working principle of the Manual pipeline strainer mainly depends on the internal filter to block the impurity particles in the fluid, so as to achieve solid-liquid separation or purification. The purpose of fluid. Specifically, when the fluid passes through the basket filter, the larger solid particles, impurities, etc. in the fluid will be intercepted on the inner surface of the filter to form a filter cake. The clean fluid enters the outflow end of the filter through the gap of the filter and is finally discharged.
The Manual pipeline strainer is equipped with fine filters or filter layers, and the size of these meshes is designed to be smaller than the size of the impurity particles that need to be intercepted.
The filter of the Manual pipeline strainer is usually made of porous material, which has good breath ability and filtration effect. According to the filter requirements and occasions of use, you can choose filters of different specifications and materials. In addition, the Manual pipeline strainer can also be cleaned or replaced as needed to ensure its filtration effect and service life.
2. Maintenance and cleaning: As the filtration operation is carried out, more and more impurities accumulate on the filter basket will increase the resistance of the fluid through the filter basket, which may cause an increase in pressure drop.
When the pressure drop reaches a certain level, it means that the filter basket needs to be cleaned or replaced.
When cleaning, you can release the internal pressure by closing the valves at the front and rear ends of the filter, then open the flange cover of the filter and take out the filter basket for cleaning.
After cleaning, reload the filter basket into the filter, restore the connection and seal, and continue to put it into use.
Therefore, the Manual pipeline strainer is a kind of maintainable and easy-to-clean filtration device. It is suitable for pipeline systems that need to regularly remove a large number of solid impurities, especially for those with large impurities and high requirements for filtration efficiency.
Applications that hope to reduce maintenance costs.

Previous: Advantages of Manual pipeline strainers
Nextpage: The selection criteria for Manual pipeline strainers






