-
FILTRATION OF COMPLETION FLUIDS/WELL BORE CLEAN UP
2026-06-01The primary purpose of completion fluids filtration, also known as brine – and wellbore clean-up fluids is to prevent downhole contamination, which can significantly reduce well productivity and shorten the operational lifespan of the well.…
-
WATER INJECTION/WATER FLOODING
2026-06-01In the oil industry, waterflooding or water injection is where water is injected into the oil or gas formation, to increase pressure in the formation and thereby stimulate production.…
-
PRODUCED WATER TREATMENT
2026-06-01Produced water comes to the surface during production of oil & gas. The produced water can be re-used or discharged.…
-
OILY WATER TREATMENT
2026-06-01During the lifetime of an oil or gas well the water used during the processing will become oily. Completion fluids, waste water, acid flowback, hydro test discharges and the water used for water injection, pipeline and mud pit cleaning will become very gr…
-
FRAC FLUIDS
2026-06-01Filtration of frac fluids for optimal productivity of your oil well.Frac Fluids are typically composed of water, sand or other proppants, and various chemicals. It is important to control the size of these particles.…
-
WATER INTAKE
2026-06-01Seawater can be used as process fluid,water injection fluid and for cooling or utility systems.…
-
PIPELINE FLUSHING
2026-06-01Pipeline flushing is a process to maintain the pipeline quality which ensures that your equipment does not wear out or break down quickly.…
-
DECOMMISSIONING
2026-06-01Filtration’s Crucial Role in Mitigating Environmental Risks during Oil and Gas Facility Decommissioning.…
-
Crude Oil Mercury Removal
2026-06-01Mercury is a common contaminant in crude oil, requiring removal to prevent catalyst poisoning, corrosion, and environmental risk.…
-
FCC Catalyst Fines
2026-06-01Fluid catalytic cracking (FCC) units generate fine catalyst particles that must be removed from slurry oil or recycle streams to protect downstream equipment.…
-
Gas Sweetening
2026-06-01Amine-based gas treatment systems rely on solvent recirculation loops to remove H₂S and CO₂ from sour gas.…
-
MEG Regeneration
2026-06-01Monoethylene glycol (MEG) is injected into subsea gas pipelines as a hydrate inhibitor and must be continuously regenerated for reuse.…
-
Produced Water Filtration
2026-06-01Produced water extracted along with oil and gas often contains sand, corrosion products, chemical treatment residues, and insoluble salts. JOECHRE filtration...…
-
Sulfur Recovery
2026-06-01Sulfur recovery units (SRUs), such as Claus or tail gas treatment processes, often generate slurries containing elemental sulfur, catalyst fines, or other byproducts. JOECHRE filters are used to remove these solids from liquid sulfur condensate...…
| 页次：1/1 每页25 总数14 Home Previous Next Last 转到: |
