Bag filter housing model and parameters
2026-05-30Traffic：
Bag filter housing model and parameters
Bag filter housing model and parameters
Top-in bag filter, turtle back type, single bag
Description: The top-in and low-out filtration method is used to make the liquid that needs to be filtered flow from high to low. Because the liquid medium enters the filter and flows from the top of the filter bag, the liquid can be evenly distributed on the filtration surface of the filter bag, so that the fluid distribution in the whole layer is basically constant. The filter bag is less negatively affected by turbulence, with good filtration effect and long service life.
Filter material: SUS304, SUS316L
Specification and size: 1#, 2#, 3#, 4#
Filter area: 0.25m, 0.50m, 0.09m, 0.16m
Maximum operating pressure: 10.0bar
Seal material: butyl rubber, ternary ethylene propylene rubber, fluororubber, polyethylene
Surface treatment: matte bead spraying, mirror polishing, electrolytic polishing.
Side-in bag filter, flat lid, single bag
Description: The side-in bag filter adopts the side-in and bottom-out mode, with a universal flat cover design and convenient operation. The inner and outer surfaces of the simplified body are sandblasted or mirror polished, which is easy to clean. The surface of the cylinder is pickled and clockized, and the corrosion resistance is recommended. It adopts a ring bolt locking structure, which is reliable and stable sealing.
Filter material: SUS304, SUS316L
Specification and size: 1#, 2#, 3#, 4#
Filter area: 0.25m2, 0.50m, 0.09m, 0.16m
Maximum operating pressure: 10.0bar
Seal material: butyl rubber, ternary ethylene-propylene rubber, fluororubber, polytetragas ethylene Surface treatment: matte beads, mirror polishing, electrolytic polishing
Multi-bag filter, rocker arm type
Description: The rocker arm multi-bag filter is a kind of novel structure, small size, simple and flexible operation, energy-saving, high efficiency, closed work, suitable for high-flow filtration, can accommodate more impurities, and is suitable for occasions where you want to replace the filter bag after using it for a long time.
Filter material: SUS304, SUS316L
Specification and size: 2 bags, 3 bags, 4 bags, 5 bags, 6 bags, 8 bags, 12 bags, 17 bags, 23 bags Filter area: 1.0m2, 1.2m2, 2.0m2, 2.5m2, 3.0m, 4.0m2, 6.0m2, 8.5m, 11.5m2 Maximum operating pressure: 10.0 bar
Seal material: butyl rubber, ternary ethylene-propylene rubber, rubber-free, polytetra-ethylene-free surface treatment: matte beads, mirror polishing, electrolytic polishing.
Sandwich insulation filter
Description: The sandwich bag filter is a double-layer structure. The sandwich layer can pass steam or thermal oil to maintain or raise the temperature of the fluid, prevent fluid from solidification, improve the filtration speed of sticky liquid, or meet the temperature requirements of the next work seat.
Filter material: SUS304, SUS316L
Specification and size: 1#, 2#
Filtration area: 0.25m, 0.50m
Maximum operating pressure: 10.0bar
Seal material: butyl rubber, ternary ethylene-propylene rubber, gas rubber, polytetragas ethylene
Surface treatment: matte bead spraying, mirror polishing, electrolytic polishing
Cart filter
Description: The mobile cart filter is composed of a stainless steel filter, a mobile cart, a feed pump and related pipeline valves. The equipment is suitable for the environment with several outlets for cross-filtration when filtering materials. The equipment is convenient and flexible to operate, and only needs to connect the import and export of the equipment and the power source to operate.
Filter material: SUS304, SUS316L
Specification and size: 1#, 2#
Filter area: 0.25m2, 0.50m
Maximum operating pressure: 10.0bar
Seal material: butyl rubber, ternary ethylene-propylene rubber, fluororubber, polytetrafluoroethylene
Surface treatment: matte bead spraying, mirror polishing, electrolytic polishing.
Bag filter housing model and parameters
Top-in bag filter, turtle back type, single bag
Description: The top-in and low-out filtration method is used to make the liquid that needs to be filtered flow from high to low. Because the liquid medium enters the filter and flows from the top of the filter bag, the liquid can be evenly distributed on the filtration surface of the filter bag, so that the fluid distribution in the whole layer is basically constant. The filter bag is less negatively affected by turbulence, with good filtration effect and long service life.
Filter material: SUS304, SUS316L
Specification and size: 1#, 2#, 3#, 4#
Filter area: 0.25m, 0.50m, 0.09m, 0.16m
Maximum operating pressure: 10.0bar
Seal material: butyl rubber, ternary ethylene propylene rubber, fluororubber, polyethylene
Surface treatment: matte bead spraying, mirror polishing, electrolytic polishing.
Side-in bag filter, flat lid, single bag
Description: The side-in bag filter adopts the side-in and bottom-out mode, with a universal flat cover design and convenient operation. The inner and outer surfaces of the simplified body are sandblasted or mirror polished, which is easy to clean. The surface of the cylinder is pickled and clockized, and the corrosion resistance is recommended. It adopts a ring bolt locking structure, which is reliable and stable sealing.
Filter material: SUS304, SUS316L
Specification and size: 1#, 2#, 3#, 4#
Filter area: 0.25m2, 0.50m, 0.09m, 0.16m
Maximum operating pressure: 10.0bar
Seal material: butyl rubber, ternary ethylene-propylene rubber, fluororubber, polytetragas ethylene Surface treatment: matte beads, mirror polishing, electrolytic polishing
Multi-bag filter, rocker arm type
Description: The rocker arm multi-bag filter is a kind of novel structure, small size, simple and flexible operation, energy-saving, high efficiency, closed work, suitable for high-flow filtration, can accommodate more impurities, and is suitable for occasions where you want to replace the filter bag after using it for a long time.
Filter material: SUS304, SUS316L
Specification and size: 2 bags, 3 bags, 4 bags, 5 bags, 6 bags, 8 bags, 12 bags, 17 bags, 23 bags Filter area: 1.0m2, 1.2m2, 2.0m2, 2.5m2, 3.0m, 4.0m2, 6.0m2, 8.5m, 11.5m2 Maximum operating pressure: 10.0 bar
Seal material: butyl rubber, ternary ethylene-propylene rubber, rubber-free, polytetra-ethylene-free surface treatment: matte beads, mirror polishing, electrolytic polishing.
Sandwich insulation filter
Description: The sandwich bag filter is a double-layer structure. The sandwich layer can pass steam or thermal oil to maintain or raise the temperature of the fluid, prevent fluid from solidification, improve the filtration speed of sticky liquid, or meet the temperature requirements of the next work seat.
Filter material: SUS304, SUS316L
Specification and size: 1#, 2#
Filtration area: 0.25m, 0.50m
Maximum operating pressure: 10.0bar
Seal material: butyl rubber, ternary ethylene-propylene rubber, gas rubber, polytetragas ethylene
Surface treatment: matte bead spraying, mirror polishing, electrolytic polishing
Cart filter
Description: The mobile cart filter is composed of a stainless steel filter, a mobile cart, a feed pump and related pipeline valves. The equipment is suitable for the environment with several outlets for cross-filtration when filtering materials. The equipment is convenient and flexible to operate, and only needs to connect the import and export of the equipment and the power source to operate.
Filter material: SUS304, SUS316L
Specification and size: 1#, 2#
Filter area: 0.25m2, 0.50m
Maximum operating pressure: 10.0bar
Seal material: butyl rubber, ternary ethylene-propylene rubber, fluororubber, polytetrafluoroethylene
Surface treatment: matte bead spraying, mirror polishing, electrolytic polishing.
